AUTOOL OD710 · Pneumatic Waste-Oil Drainer
Collect Waste Oil Beneath the Lift
Collect used engine oil beneath a raised vehicle, monitor the recovered level, and transfer it from the tank after service. OD710 combines a wide 20 L catch pan with height adjustment up to 1.5 m, a sight window, and a mobile caster base. Pneumatic discharge reduces manual handling of collected oil.
- 30 L Waste-Oil Tank
- 20 L / 41 cm Catch Pan
- Up to 1.5 m Collection Height
- Oil-Level Sight Window
- Pneumatic Tank Discharge
Key Features
Position the 20 L Pan Where Oil Drains
20 L / 41 cm Gravity Catch Pan
The 41cm oil catch pan provides a wide oil receiving area and 20L capacity for collecting waste engine oil during vehicle service.
Height-Adjustable Lifting Rod
The lifting rod mechanism adjusts up to 1.5m. Rotate counterclockwise to release and adjust, then rotate clockwise to lock the height.
30L Thickened Tank
The 30L oil storage tank uses 1.5mm thickened material to help reduce oil leakage and air leakage during use.
360° Swivel Casters
Swivel casters help move the unit around the workshop, while locking devices improve stability during operation.
Oil Level Sight Window
The oil level sight window helps monitor waste oil recovery and decide when to discharge waste oil from the tank.
Tool Tray And Handle
The built-in tool tray supports small tool placement, and the handle helps move the machine more comfortably.
Adjustable Collection Height
The lifting rod adjusts the catch pan up to 1.5m. Release the height lock to position the pan, then tighten it before collecting oil.
30L Waste-Oil Storage
OD710 collects drained engine oil in a 30L oil drain tank with 1.5mm thickened construction. It is designed for oil draining and tank discharge.
Mobile Service-Bay Design
Swivel casters and a handle help move the unit, while wheel locks hold it in position. A built-in tray keeps small tools close by.
3 Years Warranty Support
Main unit: 3-year warranty. Standard accessories: 1-year warranty. Warranty Policy.
Safety & Compatibility
Match the Oil Path, Probe and Air Supply
No Open Flames
Do not smoke or use open flames during operation. Keep the equipment away from high-temperature, high-pressure, flammable, and explosive areas.
Engine Off During Operation
The vehicle engine must remain turned off throughout the oil recovery operation.
40-60°C Waste Oil
The working waste oil temperature is 40-60°C. Be cautious of burns when draining or discharging oil.
Protect Eyes And Hands
Wear gloves and safety goggles during operation to reduce the risk of burns, splashing oil, or accidental contact.
Forbidden Liquids
Do not use the OD710 with brake oil, gasoline, diesel, liquids containing methanol or ketones, or any flammable liquids.
Check Hose Leaks Immediately
If any hose or component leaks during operation, immediately shut off the air supply and inspect the equipment before continuing.
Use Correct Pressure
The air source pressure for oil tank discharge must not be lower or higher than the specified pressure required for normal equipment operation.
Do Not Use Rod As Handle
Do not use the height-adjustable lifting rod as a handle for moving the machine. Tighten adjustment screws if they become loose.
Release Internal Pressure
After completing operation, release internal pressure, clean the equipment, and avoid damage or personal injury caused by improper pressure handling.
Do Not Overload
Follow safe operating procedures, do not overload the equipment, and keep safety guards complete and reliable.
Protect the Housing
Avoid rubbing the product against rough surfaces or wearing the sheet metal housing during use and movement.
Tighten Loose Connections
Regularly inspect parts that need tightening or connection. If loose parts are found, tighten them in time for safe operation.
Treat Corrosion
External and internal parts that contact chemical media should be treated with rust removal and painting when needed.
Replace Worn Components
Adjust clearance as needed, replace worn or damaged parts in time, and avoid contact with corrosive liquids.
Clean and Dry Storage
When not in use, store the OD710 in a dry place. Do not store it in hot, humid, or non-ventilated areas.
Keep the OD710 clean, dry, properly tightened, and protected from corrosion to maintain performance and service life.
Permitted Waste-Oil Tasks
Read these safety rules before using the OD710. The machine is for waste engine oil draining and tank discharge only; do not use it for unlisted liquids or functions.
No Unauthorized Modifications
Do not make unauthorized changes or disassemble the equipment.
Follow Listed Functions
Do not use the equipment for functions not listed in the manual.
Waste Oil Disposal
Dispose of or recycle waste oil according to applicable local regulations.
Instruction Compliance
If damage or personnel accidents occur due to non-compliance with the instructions, warranty support may not apply.
Specifications
OD710 Specifications
| Collection & Workshop Features | |
|---|---|
| Large-size Oil Pan | Yes |
| Adjustable Height | Yes |
| Thickened Tank Construction | Yes |
| Oil Level Sight Window | Yes |
| 360° Swivel Casters | Yes |
| Rapid Vacuum Extraction Technology | Yes |
| Tempered Glass Measuring Cup | Yes |
| Air & Vacuum Requirements | |
| Air Supply Pressure | 6-8bar |
| Oil Discharge Pressure | 0.6-0.8bar |
| Air Consumption | 150L/Min |
| Vacuum Level | 0-65cmHg |
| Capacity, Temperature & Setup | |
| Tank Capacity | 30L(7.93gal) |
| Measuring Cup Capacity | 10L(2.6gal) |
| Oil Catch Pan Size / Capacity | 45*35*19cm |
| Working Oil Temperature | 40-60℃ |
| Evacuation Wands Qty | 5 PCS |
Manual & Support
Find Operating and Air-Supply Guidance
AUTOOL OD710 User Manual
Open the PDF manual for AUTOOL OD710 waste-oil collection, catch-pan height adjustment, tank-level monitoring, pneumatic discharge, mobile positioning, service safety and troubleshooting support.
Package Contents
Check Tanks, Probes and Included Parts
- Main UnitOD710 oil storage tank assembly with drain hose and valve components
- Oil CollectionOil catch pan and height-adjustable lifting rod
- Mobility PartsHandle, tool tray, and swivel casters
- ToolsTools
- DocumentationAUTOOL OD710 user manual
- Included ComponentsOD710 main unit and the accessories listed in this package section.
FAQs
Oil Recovery and Air-Supply Questions
What Is AUTOOL OD710 Used For?
AUTOOL OD710 is used to discharge waste engine oil from vehicles into the oil storage tank through the oil catch pan. It is designed for waste engine oil recovery and tank discharge, not for functions outside the manual.
Can OD710 Be Used With Brake Oil, Gasoline, Or Diesel?
No. OD710 is strictly prohibited for use with brake oil, gasoline, diesel, liquids containing methanol or ketones, and flammable liquids.
Does The Engine Need To Stay Off During Operation?
Yes. The engine must remain turned off throughout the OD710 waste oil recovery operation.
What Waste Oil Temperature Is Recommended?
The working waste oil temperature is 40-60°C. Be cautious of burns and wear gloves and safety goggles during operation.
Does OD710 Require Vehicle Lifting Equipment?
Yes. During waste oil recovery, use a lifting device to raise the vehicle to a suitable height and align the oil pan funnel with the engine oil drain hole. In the OD series comparison, OD710 is marked as requiring lifting equipment.
What Is The Difference Between OD710, OD720, And OD760?
OD710 is a 70L waste oil drainer with a 20L oil catch pan and requires lifting equipment. OD720 adds rapid vacuum extraction, a 10L tempered glass measuring cup, 5 evacuation wands, 6-8bar air supply pressure, and 0-65cmHg vacuum level. OD760 adds similar vacuum extraction functions plus an 80L tank and toolbox structure for larger workshop needs.
What Should I Do If A Hose Or Component Leaks During Operation?
Immediately shut off the air supply and conduct a detailed inspection to eliminate the problem before continuing operation.
How Long Is The OD710 Warranty?
Main unit: 3-year warranty. Standard accessories: 1-year warranty. Warranty Policy.
