AUTOOL C80 · Portable On-Vehicle EFI Cleaner
Run Focused On-Vehicle Petrol EFI Cleaning
Clean supported petrol EFI circuits without removing the injector assembly using a 600 mL hanging vessel and regulated external air. The gauge and control valve help set fluid delivery for the selected procedure, with adapters for varied petrol-car and light-truck connections. Compatible throttle/intake and TWC-related workflows use their specified low-pressure setup, detergent and vehicle service limits.
- 600 mL Cleaning Vessel
- On-Vehicle Petrol EFI Cleaning
- Gauge & Pressure Regulator
- Throttle / Intake Service Support
- Portable Hook & Chain Setup
Key Features
A 600 ml Vessel for Portable Fuel-System Cleaning
Non-Dismantle Fuel-Circuit Cleaning
The cleaner routes cleaning fluid through a supported petrol vehicle fuel circuit without removing the injector assembly. Under proper cleaning conditions, fuel system cleaning can help improve fuel supply, support fuller combustion, and reduce exhaust emissions.
Throttle and Intake Support
Supports compatible throttle-style and intake-related cleaning procedures with the correct low-pressure setup and fluid.
TWC-Related Workflow
Supports the applicable AUTOOL TWC-related cleaning workflow when the connection, detergent and vehicle service limits are confirmed.
Adjustable Pressure Delivery
The gauge and regulator provide adjustable pressure delivery for the selected approved procedure, with different setups for EFI cleaning and throttle-style cleaning.
Integrated 600 ml Vessel
The 600 ml vessel stores cleaning fluid and feeds it through the control valve and outlet pipe for controlled flow during service.
Wide Adapter Selection
This fuel injection cleaning kit includes adapter styles for many European, Asian, and US cars and light trucks, subject to connector and petrol fuel-system confirmation.
Portable Hanging Setup
A hook and chain support positioning the pressure vessel at the vehicle during the approved service procedure.
Vessel Size
The product-detail image labels the vessel at 280 mm high and 73 mm in diameter.
3 Years Warranty Support
Main unit: 3-year warranty. Standard accessories: 1-year warranty. Warranty Policy.
Safety & Compatibility
Control Fluid, Pressure, Connections, and Ventilation
Gasoline Vehicle Scope
Use C80 only where the petrol fuel-system layout, fluid and adapter can be confirmed; do not assume diesel or high-pressure test capability.
External Air Required
Use a regulated compressed-air source and never treat the 0–140 PSI gauge range as the required working pressure.
No-Leak Start Condition
Do not start the engine until every connection is secure and dry; stop the operation immediately if leakage appears.
Fire and Ventilation Controls
Keep ignition sources away, provide effective exhaust ventilation and suitable fire protection, and wear eye and hand protection.
Correct Cleaning Fluid
Cleaning fluid is not included. Use only a fluid approved for the service path and follow its SDS and handling instructions.
Release Pressure
Relieve vessel and hose pressure before opening the cap or disconnecting any line.
Specifications
EFI Fuel-Circuit Cleaning Specifications
| Workflow & Inputs | |
|---|---|
| Vehicle state | On vehicle |
| Procedure pressure | 40–50 PSI |
| Required inputs | External air, approved fluid, matching adapter |
| Measured result | No individual injector measurement |
Manual & Downloads
Use the Manual for Setup and Cleaning Procedures
AUTOOL C80 Manual & Guides
Visit the manual download center to find model-specific C80 setup, petrol EFI cleaning, adapter selection, fluid-pressure safety, maintenance, and troubleshooting guidance.
Package
What’s Included
- C80 Cleaner1 pressure-vessel cleaner assembly.
- Adapter Kit1 adapter-kit group with connector styles, hoses, and related accessories.
- Manual and FunnelConfirm the final shipment revision.
- Cleaning FluidNot included.
FAQs
EFI Cleaner Setup Questions
Is C80 an injector flow-test bench?
C80 cleans the fuel and intake system on the vehicle; use a bench tester when individual injector spray, leakage, or flow comparison is required.
Does C80 Need An External Air Source?
Yes. C80 requires a suitable regulated external compressed-air source connected to its air inlet; use the pressure gauge and regulator to set the required cleaning pressure.
Is Cleaning Liquid Included?
No. Purchase suitable cleaning fluid separately and confirm that it is approved for the task and materials before using C80.
What Pressure Should I Use For EFI Cleaning?
For EFI model cleaning, connect the external air source to the air port of the cleaner and adjust the pressure to 40-50 PSI.
- The EFI procedure uses 40–50 PSI and throttle-style work uses 1–5 PSI. Confirm the setting for the specific vehicle and approved procedure.
Does the kit fit every petrol vehicle?
Confirm that the vehicle’s fuel-line layout and the selected adapter match before ordering or connecting the cleaner.
What Should I Do If There Is No Fuel Return Hose?
If there is no return hose, remove the fuel pump fuse so the fuel pump will not work during the cleaning setup. Check all connection points and confirm there is no leakage before starting the engine.
- Use only the approved vehicle-specific setup. C80’s no-return-line procedure calls for disabling the fuel pump; verify the current instructions before work.
Will cleaning reduce emissions or restore performance?
Those outcomes are not guaranteed. C80 provides a cleaning procedure; vehicle results depend on the deposit, fault cause, fluid, setup and condition.
How long is the warranty?
Main unit: 3-year warranty. Standard accessories: 1-year warranty. Warranty Policy.
What Is The AUTOOL C80 Used For?
AUTOOL C80 is used for non-dismantle fuel injector cleaning, fuel system cleaning, intake system cleaning, throttle valve cleaning, fuel nozzle cleaning, and TWC-related cleaning workflows under proper conditions.
Does C80 Require Removing The Fuel Injector?
No. C80 is designed as a non-dismantle auto injector cleaner, so it can clean the injector, throttle, and fuel system through the connected cleaning circuit without removing the injector assembly.
What Vehicles Does C80 Fit?
The kit is intended for many USA, EU, and Asia cars and light trucks. Because vehicle fuel line layouts and connector styles vary, confirm the adapter match before cleaning.
How Do I Identify The Fuel Inlet And Return Hose?
Generally, the inlet hose is bigger and the return hose is smaller. A filter is usually connected on the inlet hose side, and a buffer is usually on the return side. Some hoses also have an arrow showing the fuel flow direction.
What Is Included In The Package?
The package includes 1 pc fuel injector cleaner and 1 adapter-kit group, plus hoses, connector accessories, a manual, and a funnel. Cleaning liquid is not included.
What Are The Main Specifications?
The main specifications are a 0–140 PSI gauge range, 600 ml tank capacity, and 4.0 kg weight. Reference cleaning pressures are 40–50 PSI for EFI and 1–5 PSI for throttle-style work, subject to vehicle and procedure confirmation.
How Can I Confirm Adapter Fitment Or Cleaning Setup?
Contact AUTOOL Store before ordering or before cleaning if you need help confirming adapter fitment, cleaning fluid, EFI pressure, throttle pressure, fuel hose connection, or package contents.
What Pressure Should I Use For Throttle-Style Cleaning?
For throttle-style systems, use the same connection method as EFI cleaning but adjust the air-source pressure to 1–5 PSI.
