AUTOOL SC611 · 25 L Coolant Flush & Exchange Machine
Automate Coolant Recovery and Equal Exchange
Automate coolant circulation, equal-volume exchange, old-fluid recovery, and new-fluid delivery with one controlled workshop cycle. Separate vacuum-hold and vacuum-fill modes support sealing checks and air-controlled refilling on compatible vehicle procedures, while dedicated new- and used-coolant tanks show fluid levels in real time. The electric-pump system works without an external air compressor.
- Automatic Coolant Exchange
- 25 L New + Used Tanks
- Vacuum-Hold + Vacuum Fill
- AC 100–240 V Input
- No Air Compressor Required
Key Features
Control Exchange, Vacuum Test and Refill
One-Button Automatic Exchange
The control cycle manages coolant delivery and recovery without repeated manual switching.
Circulation Flush Mode
The electric-pump circuit circulates compatible coolant through the connected service route.
Balanced New / Used Coolant Exchange
New coolant is delivered while old coolant is recovered to support a balanced exchange process.
Vacuum-Hold Test
A dedicated vacuum-hold mode helps check whether the connected cooling system maintains vacuum.
Vacuum Fill Mode
Vacuum-assisted filling supports compatible cooling systems where trapped air is a service concern.
Real-Time Fluid Levels
The machine displays new- and used-coolant tank levels during service.
Pressure and Flow Control
Controlled flow works with overload protection during the exchange cycle.
No External Air Compressor
The electric-pump design uses AC power without a separate compressed-air supply.
3 Years Warranty Support
Main unit: 3-year warranty. Standard accessories: 1-year warranty. Warranty Policy.
Safety & Compatibility
Work Cold and Match the Service Port
Open Only When Cool
Do not open or connect a pressurized hot cooling system.
Match the Coolant
Use the coolant chemistry and mixture specified for the vehicle; keep recovered coolant separate.
Confirm the Service Route
Verify that the vehicle procedure supports the selected exchange or vacuum-fill connection.
Check Every Seal
Inspect adapters, hoses and tank connections before applying vacuum or starting flow.
Complete Vehicle Bleeding
Complete the model-specific bleed, heater-circuit and final-level checks after filling or exchange.
Specifications
Tank, Power and Air Supply Requirements
| Specification | Value |
|---|---|
| Tank Capacity | 25 L new/used tanks |
| Power Supply | AC 100–240 V |
| Power Rating | 15 W |
| External Air Compressor | Not required |
Manual & Support
Confirm Adapters and Service Setup
AUTOOL SC611 Manual & Guides
Visit the manual download center to find SC611 guidance for coolant circulation, equal-volume exchange, vacuum testing and filling, plus operating safety and troubleshooting support.
Package Contents
Check Adapters, Hoses and Included Parts
- Main UnitAUTOOL SC611 cooling-system flush and exchange machine
- Order ConfigurationConfirm hoses, adapters, power cord and documentation included with the selected version before purchase
FAQs
Cooling-System Fit and Service Questions
What service is SC611 designed for?
The machine manages coolant circulation, equal-volume exchange, old-fluid recovery, new-fluid delivery, vacuum-hold checks and vacuum-assisted filling through a compatible service route, without repeated manual switching during the exchange cycle.
How should I confirm vehicle compatibility?
Verify that the vehicle procedure supports the selected exchange or vacuum-fill connection.
Does the machine replace the vehicle bleeding procedure?
After filling or exchange, complete the vehicle-specific bleed, heater-circuit, and final-level checks.
Which voltage should I order?
Choose the AC version that matches the workshop supply and verify the machine label before use.
How should I prevent coolant mixing?
Use the coolant chemistry and mixture specified for the vehicle; keep recovered coolant separate.
